The temperature outside is going to start dropping soon and that means you’re going to want to run your heating system. But instead of going for the thermostat, you may be more likely to put on a few extra layers and walk around with a blanket around your shoulders to save some money on astronomical home heating bills. You shouldn’t have to live like the early settlers just to keep your energy costs under control, it’s possible that you might have some inefficient heating problems in your home and fixing them could be the key to bringing down those costs. Most heat efficiency issues are pretty simple to diagnose and fix. So if you’ve been reluctant to turn the heat on in your home, here are a few areas you may want to have checked out before the change in seasons.
You wouldn’t believe how many homeowners are paying higher heating costs simply because there are leaks in the home. These leaks can occur around doors and windows, when these openings are adequately sealed and gaps emerge. When you run your heating system to fill your home with warm air, guess where that air is going? Right out the window, quite literally.
You may also find leaks in your air ducts as well and heating systems that use forced air could be running inefficiently if your air is leaking out of your ducts before being distributed into your rooms. Heat will expand to colder areas and you shouldn’t have to pay through the nose to send your climate-controlled air outside. Quarles delivered fuels can diagnose any leaking areas in the home so that you can keep more of your warm air indoors, where it belongs, and help you conserve fuel and money.
These are very important for keeping your heating system working properly and they’ll also be helpful in keeping your heating costs down. Dirty air filters are one of the leading causes of inefficiency because when air isn’t getting into the system correctly, that can lead to the system working harder and longer just to reach the temperature you’ve set on the thermostat.
You should be changing out your air filter every three months to ensure that the system is getting the proper air flow. When the filters are too dirty, that can also damage your system by overworking it and you could be incurring far higher expenditures than just rising heating bills. You could be paying for repairs to the system as well. Go to your local hardware store and pick up some filters, they don’t cost more than $20 for a set of three in most instances. That’s a small price to pay to reduce your heating costs.
Furnaces and Burners
Sometimes your heating inefficiency is as simple as an open door. Furnaces and burners come with doors that need to be sealed shut in order for the system to work at full efficiency. So check the doors on your furnaces and burners and be sure they are closed, if they are not you could be paying a lot more to heat your home. There’s no reason to waste money simply because of an open furnace door.
Another component of your system that needs to be checked is your thermostat. In some cases, it’s just not properly adjusted and you only need to set it correctly. If that’s all it is, sure it might be annoying but you should probably consider yourself lucky that there isn’t a more urgent issue at play. However, if your thermostat is properly set and your system still isn’t running efficiently, then you could be dealing with a bigger concern. Of course, there are some of you out there who may be playing with the thermostat too often and that’s the real cause of your heating inefficiencies.
A thermostat is supposed to work as a switch, triggering your system to operate when necessary. But many homeowners will turn up their thermostats when it gets cold in the home, turn it down when it reaches a comfortable temperature, and then turn it back up again when the temperature drops. This is not the way to use a thermostat. Cranking your heat all the way up isn’t going to heat the room any quicker, it’s only going to run your heating bills through the roof. A great solution to this problem is to install a programmable thermostat which lets you set the temperature automatically and the system does the rest, at a much more economical rate of use than a manual unit.